Swab Cups

Below is Texas Products WSD complete line of swab cups. Our swab cups have proven their
strength and durability in the field all over the world. Here you can find the best swab cup to perform any type of well servicing job.

TX-TA

TX TA Swab CupsThe TX-TA swab cup is a medium-duty, all rubber, variable lip cup. The TX-TA is made from a slightly softer rubber for greater flexibility under lighter loads. The TX-TA can be run on any swab mandrel and is available with either a steel or an aluminum bushing in all popular sizes.


TX-NUF

TX NUF1 Swab CupsA dictionary defines enough as “sufficient; a necessary amount”. That’s the TX-NUF; it’s sufficient for your swabbing job. The TX-NUF swab cup is a high performance, heavy-duty, all rubber cup. The unique design of the TX-NUF provides long life, maximum lift capacity, even under heavy loads and deep swabbing conditions, with a dynamic shape that falls very easily. The TXNUF swab cup is made from the finest high strength, abrasion resistant, low friction rubber. The TXNUF is offered in a steel or aluminum bushing. The TX-NUF is available for both standard and heavy wall tubing and may be run on any swab mandrel.


 TX-MV

TX MV Swab CupsThe TX-MV is a light duty, all rubber swab cup. The multiple upturned lips pass easily through tight spots and are especially suited for fluid with a high ratio of suspended sand because the lips will invert to dump an excessive load. The TXMV is available with either a steel or an aluminum bushing and can be run on any swab mandrel.


 TX-V

TX V Swab CupsThe TX-V is a ring type, single lip, flexible, all rubber swab cup molded on a steel bushing. The TXV is ideal for lifting sand-laden fluids and for light load swabbing. The flexible TX-V falls quickly and automatically dumps excess loads. The number of TX-V swab cups may be varied to meet the swabbing conditions and can be run on any swab mandrel.


 TX-GW

TX GW Swab CupsIntroduced by Guiberson in 1940, the GW style swab cup has been perfected by Ingram International, Inc.. The TX-GW seals so well it has become the industry standard for total fluid removal. The TX-GW is a single lip cup, reinforced by molded-in steel spring wires, in tubing size cups. The TX-GW is ideal for getting the last drop out of the well and may be run on any swab mandrel.


 TX-TUF

TX TUF Swab CupsThe TX-TUF is a flexible rubber swab cup. Using a unique method of attaching steel spring reinforcing wires along with a molded in valve ring. Thus making the TX-TUF very strong for lifting medium to heavy loads. Flexible enough for light loads, allowing it to be used in both regular and undersized tubing. As the name implies, it’s tough! After many field tests running our TX-TUF cup versus Guiberson’s “J” swab cup, the TX-TUF cup performs better and lasts longer at a fraction of the cost. Therefore you get longer runs with the TX-TUF saving rig down time and money.


TX-J

TX J Swab CupsThe TX-J is a very durable heavy duty swab cup with a long flexible lip to provide a perfect up-stroke seal. The strong steel reinforcing wires are secured by a rigid retaining ring, which keeps the wires from snagging, even in the roughest tubing. Available in sizes 4 1/2″ thru 5 3/4″ . The TX-J cup is the toughest heavy load cup available.


 TX-JS

TX JS Swab CupsThe TX-JS casing swab cup is a heavy-duty swab cup, designed for lifting maximum loads from any depth. Its flexible lip provides a perfect upstroke seal and automatically compensates for wear. This is the most dependable and durable heavy load cup available. The TX-JS is similar to the TX-J cup but with added flexibility to provide a seal when lifting lighter loads. Available in sizes 4 1/2″ thru 5 3/4″.


 

ALL RUBBER SWAB CUPS – ENGINEERING DATA & PART NUMBERS

TABLE SWAB CUPS 1 Swab Cups

  • *   Undersize cup – for easier/faster falling; plastic lined or internal upset

WIRE REINFORCED SWAB CUPS – ENGINEERING DATA & PART NUMBERSTABLE WIRE REINFORCED CUPS e1283371526562 Swab Cups

  • * Undersize cup – for easier/faster falling; plastic lined or internal upset
  • () Trico Special

CASING SWAB CUPS – ENGINEERING DATA & PART NUMBERSTABLE CASING CUPS1 Swab CupsTABLE CASING CUPS2 Swab Cups

  • S Indicates that this size swab cup is available by special order only
  • * Part Number TP88884 alternate swab cup to run 5 1/2″ casing on a 4 1/2″ swab mandrel
  • ** Part Number TP93480 is a heavy duty alternate to TP57467

Download Swab Cup Information